|
|
I will try 1.4.0 tonight. Meanwhile, here are the answers you asked for...
No desktop environment, command line only. Other info follows...
uname -a Linux raspberrypi 6.1.21-v7+ #1642 SMP Mon Apr 3 17:20:52 BST 2023 armv7l GNU/Linux
inxi -SF System: Host: raspberrypi Kernel: 6.1.21-v7+ armv7l bits: 32 Console: tty 2 Distro: Raspbian GNU/Linux 11 (bullseye) Machine: Type: ARM Device System: Raspberry Pi 3 Model B Plus Rev 1.4 details: BCM2835 rev: a020d4 serial: 00000000e126b01c CPU: Info: Quad Core model: ARMv7 v7l variant: cortex-a53 bits: 32 type: MCP Speed: 1400 MHz min/max: 600/1400 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1400 4: 1400 Graphics: Device-1: bcm2835-hdmi driver: vc4_hdmi v: N/A Device-2: bcm2835-vc4 driver: vc4_drm v: N/A Display: server: X.org 1.20.11 driver: loaded: modesetting unloaded: fbdev tty: 112x24 Message: Advanced graphics data unavailable in console. Try -G --display Audio: Device-1: bcm2835-hdmi driver: vc4_hdmi Sound Server: ALSA v: k6.1.21-v7+ Network: Device-1: Microchip (formerly SMSC) type: USB driver: lan78xx IF: eth0 state: up speed: 1000 Mbps duplex: full mac: b8:27:eb:26:b0:1c IF-ID-1: wlan0 state: down mac: b8:27:eb:73:e5:49 Drives: Local Storage: total: 7.44 GiB used: 2.02 GiB (27.1%) ID-1: /dev/mmcblk0 model: SD16G size: 7.44 GiB Partition: ID-1: / size: 7.04 GiB used: 1.97 GiB (27.9%) fs: ext4 dev: /dev/mmcblk0p2 ID-2: /boot size: 255 MiB used: 50.4 MiB (19.8%) fs: vfat dev: /dev/mmcblk0p1 Swap: ID-1: swap-1 type: file size: 100 MiB used: 0 KiB (0.0%) file: /var/swap Sensors: System Temperatures: cpu: 45.1 C mobo: N/A Fan Speeds (RPM): N/A Info: Processes: 144 Uptime: 2d 20h 45m Memory: 998 MiB used: 260.4 MiB (26.1%) gpu: 76 MiB
Init: systemd Shell: Bash inxi: 3.3.01
Thanks!
- al
On Sunday, April 14, 2024 at 7:10:47 AM UTC-5 Albrecht-S wrote:
On 4/14/24 14:04 'Albrecht Schlosser' via fltk.general wrote:
> Please tell us more about your OS, which Linux version (`uname -a`),
> which desktop environment (Gnome, KDE, xfce, ...) and everything that
> may be of interest about your environment. I read that you're using "a
> new Rpi 3". There are several OS choices for Rpi, which one are you using?
I forgot to mention: `inxi` is a very helpful tool. On Debian based
systems you can install it with `sudo apt install inxi` if you don't
have it already. If your OS is not Debian (or Ubuntu) based, please use
the package manager of your OS to install it.
Please post the output of `inxi -SF` so we can see more about your OS
environment.
--
You received this message because you are subscribed to the Google Groups "fltk.general" group.
To unsubscribe from this group and stop receiving emails from it, send an email to fltkgeneral+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fltkgeneral/0cc7fe53-6bd6-416f-8a8b-fa7a5aa61820n%40googlegroups.com.
[ Direct Link to Message ] | |
|
| |